Insportline Targario IN 7561 YK-BKS122, Руководство пользователя

Страница: 7 / 12

7
71 LITTLE PLASTIC 1 14*9*14
72 LOCK NUT 2 M33*1*4
73 WOOLEN BLOCK 1 113*25*6
74 BOLT 2 GB/T 5780-2000 M5*30
75 SPRING BRAKE 1
δ1.0
76 LOCK NUT 2 GB/T 889.1-2000 M5
77 SPRING WASHER 1 2 GB/T 859-1987 5
78 BOLT 2 GB/T 5780-2000 M5*10
ASSEMBLY INSTRUCTIONS
PREPARATION:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above of this instruction
sheet you will find an explosion drawing with all single parts (marked with numbers) which this item
consists of.
STEP 1:
Attach the Front Stabilizer (pt.15) to the Main Frame
(pt.16) using two Ø8 Flat Washers (pt.5), M8 Domed
Nuts (pt.6) and M8*52 Carriage bolts (3).
Attach the Rear Stabilizer (pt.4) to the Main Frame
(pt.16) using two Ø8 Flat Washers (pt.5), M8 Domed
Nuts (pt.6) and M8*52 Carriage bolts (3).
STEP 2:
Slide the seat post (12) into the vertical Seat post (10) and, at the
desired position, align holes and fix in place with the Spring
Adjustment Knob (pt.7). Now fix the Seat (13) to the seat post
(12) as shown. Insert the vertical Seat Post (10) into the main
frame (16) and line up the holes. Secure the saddle in position
with the Adjustment Knob (7). The correct height for the seat
can be adjusted after the bike is fully assembled.