9
Step 3:
Use 4 pcs M8*50*20 screws fit the console to the stand post and tight the screw.
Step 4:
Use 4pcs M3*28 screws fit the handle bar cover to the PU handle bar and tight the screw.
SETTING UP YOUR TREADMILL
FOLDING &UNFOLDING THE TREADMILL
1. Unplug from power point before folding
2. Lift deck until it's parallel to the upright post
3. Check the cylinder locks into right position
4. Place both hands on the running deck, and press one foot on the middle section of the
cylinder to disengage the locking mechanism. Both hands press down, and the base frame
can down slowly. Then take off both hands, the deck can down itself.