![background image](http://html1.mh-extra.com/html/insportline/in-9101/in-9101_user-manual_2069302014.webp)
When folding the device open, there is a risk of crushing in the area of the joint ! Hold the
device only outside of this area while folding it open.
UNFOLDING
Remove the safety pin (31) from the main frame (1), open the frame and place it on the ground.
Align the openings of the main frame (1) and the support frame (24). Push safety pin ( 31) through the openings.
COMPUTER
FUNCTIONS
STEPS (COUNT):
the stepping function is displayed permanently on screen LCD1.
STEPS /MIN (RPM):
Press the MODE button to go to the next button STEP / MIN. This function will display
on the screen LCD2 the number of steps per minute that you are actually doing.
SCAN (SCAN):
Press the MODE button to move to the next selection key for the SCAN function. The scan
now automatically scans through all the functions of the computer. Each function is displayed on LCD2 screen
for about 4 seconds before the next function to be displayed. The third selection arrow will always bet on the
current function displayed on the computer screen (this type of arrow only appears with the SCAN function).
PULSE (PUL):
Grasp both MEGA pulse sensors with both hands or Press the MODE button to move the
selection key on the PULSE function. The current heart rate will appear on the screen LCD2. You can also set a
target heart rate zone. Press the MODE button to select the function PULSE, press the SET button to set a
frequency between 40 and 240 bpm. As soon as you reach the target, the device beeps three warning. The setting
of the pulses can be deleted using the RESET button. The pulsations are indicative and may vary from the real
ones so are not suitable for therapeutic purposes.
TOTAL STEPS (T.CNT):
Press the MODE button to go to the selection key for the function TOTAL STEPS.
The LCD2 screen will display the total number of steps resulting from all the training units. When the batteries
are replaced, this value will be reset.
TIME (TIME):
Shows the elapsed time from the time of operation of the unit. The TIME function is displayed
in the LCD2 only in combination with the SCAN function. E 'can also select the countdown. Press the MODE
button to select the TIME function, press the SET button to set a time from 1 to 99 minutes. As soon as it reaches
zero, the device beeps twice warning. The setting of the countdown can be deleted with the RESET button.
14
Содержание IN 9101
Страница 1: ...USER MANUAL EN IN 9101 Power Stepper inSPORTline Bailar 1...
Страница 4: ...EQUIPMENT 4...
Страница 18: ...EXPLODED DRAWING 18...