Insportline IN 8056, Руководство пользователя

Страница: 11 / 19

11
STEP 4: HANDLEBAR AND COMPUTER INSTALLATION
Tool:
5mm Allen Wrench with Phillips Screwdriver
Remove two M8x16 Hexagon Socket Pan Head Cap Bolts (24) and two Ø18xØ8x1.5t Curve Washers (37) from
the Handlebar Post (3). Remove bolts with the 5mm Allen Wrench with Phillips Screwdriver provided.
Insert the Hand Pulse Sensor Wires (53) into the hole on the Handlebar Post (3) and then pull the Hand Pulse
Sensor Wires (53) out from the top end of the Handlebar Post (3).
Attach the Handlebar (2) onto the Handlebar Post (3) with two M8x16 Hexagon Socket Pan Head Cap Bolts (24)
and two Ø18xØ8x1.5t Curve Washers (37) that were removed. Tighten bolts with the 5mm Allen Wrench with
Phillips Screwdriver provided.
Remove two M4x12 Cross Recessed Pan Head Bolts (47) from the Computer (10). Remove bolts with the 5mm
Allen Wrench with Phillips Screwdriver provided.
Connect the Extension Sensor Wire (33) and Hand Pulse Sensor Wires (53) to the wires that come from the
Computer (10). Tuck wires into the Handlebar Post (3). Attach the Computer (10) onto the top end of the
Handlebar Post (3) with two M4x12 Cross Recessed Pan Head Bolts (47) that were removed. Tighten bolts with
the 5mm Allen Wrench with Phillips Screwdriver provided.