RUNNING BELT ASJUSTMENT AND LUBRICATION
ADJUSTMENT OF RUNNING BELT
Before leaves the plant, the rigger and the inspection personnel have adjusted the running belt to adjust the full
fine, not runs the leaning phenomenon. But, after process transportation, possibly can cause the Change.
Therefore, you must try to run before using, if occurs runs the leaning phenomenon, then must adjust the hind
axle the adjuster
。
Running belt shift to the left, please screw down left screw or loosen right screw. Adjust contrast with the above
method. Please Screw down right screw or loosen left screw. Attention, do not screw down to running cincture.
Attention, please must go to the central belt when you run, don’t run the risk to impose legal side, or make
adjustments to avoid any deviation human failure. When you have found favor with running side, the other side
can dictate what they put in to the man, in order to correct treadmill belt.
LUBRICATION OF RUNNING BELT
After this machine is used period of time, possibly will feel runs the ambulacrum’s lubrication resistance to have
increases. Clean and the lubrication is extremely essential.
Concrete method: Raises runs an ambulacrum’s side, scours running panel , evenly scratches the lubricating oil
spreads in the plate .
CLEANSING OF RUNNING BELT
If its be used for 4-5 months, it was found underneath a treadmill obvious marks (from dust accumulation), with
run-removed with the cleaning agent running belt cleaned, dried, then can use again
Safety precautions
Machinery Safety
When using the treadmill, should confirm whether it is normal, do not use the treadmill with problem.
Please check before using any fastening bolts.
Limits a person to use the same time.
Appropriate Clothes
Please wear appropriate clothing. Please do not wear likely to be any part of a clothes hook to the treadmill.
When use the treadmill, please wearing non-smooth soled shoes.
Do not wear the shoes with heel or leather soles. Please check if soles of their shoes dirty and embedded in rock.
