![background image](http://html1.mh-extra.com/html/insportline/in-1842/in-1842_user-manual_2068930019.webp)
19
HORIZONTAL POSITION OF THE SADDLE
1. Step on the pedal so that it is in its lowest position.
2. But your foot on the pedal parallel to the ground.
3. Adjust the saddle so that your knee and the pedal
align in a vertical position to the ground. Some
cyclists prefer to have the saddle a little more
forward.
NOTE:
The saddle should be parallel to the ground
and aligned with the frame.
4. Tighten the saddle clamp fully.
BRAKE AND BRAKE CABLE ASSEMBLY
1. Connect the cable to the brake lever
– open
the lever and insert the cable end.
2. Thread the cable through the adjustable bolt
and safety nut. Tighten the safety nut.
3. Attach the brake to the fork with a screw and
tighten it.
4. Pull on the cable until the brake pads are
touching the rims and then tighten the brake
screw.
Check that the brake pads are in contact and aligned
with the rims.
See chapter about setting the brake system.
STEM AND HEADSET ASSEMBLY (4 BOLTS)
1. Compression bolt
2. Handlebars
3. Upper headset cover
4. Stem
5. Side bolts
6. Headset
7. Frame