14
STEP 7
WARNING:
•
Two capable adults required for this step.
•
NEVER leave system in upright position without proper weight in base or the system will tip over.
•
Manufacturer recommends using sand. If using water, see SAFETY INSTRUCTIONS: WARNING.
1.
Place base where it will be used. Unscrew and remove base cap.
2.
First adult: Tip base up at a 45° angle.
3.
Second adult: Carefully pour sand into base.
4.
Allow sand to slide into lower and of base near the wheels. Gradually lower base as sand is poured to
ensure sand fills entire base. Once full, replace cap.
5.
If filling with water, DO NOT tip base up.
TRANSPORT
1.
Adjust backboard to lowest position.
2.
While holding pole and lifting base, carefully lean system forward until wheels touch ground.
3.
While holding pole and base, roll system to desired location.
4.
Stand pole upright and set base flat on ground.
5.
ALWAYS check to make sure system is stable in new location.
