Insportline Ellare YK-B5815, Руководство пользователя, Страница: 10 / 18

10
STEP 3: HANDLEBAR POST, HANDLEBAR POST COVER, AND TENSION CONTROL KNOB
INSTALLATION
Remove four M8x15 Bolts (19
), four Ø20xØ8x2.0 Washers (14) from the Main Frame (1). Remove
bolts with the S6 Allen Wrench provided.
Slide the Handlebar Post Cover (58) up to the Handlebar Post (7).
Insert the Tension Cable (55) through into the bottom hole of Handlebar Post (7) and pull it out from
the square hole of Handlebar Post (7).
Connect the Sensor Wire (50) from the Main Frame (1) to the Extension Sensor Wire (63) from the
Handlebar Post (7).
Insert the Handlebar Post (7) onto the tube of the Main Frame (1) and secure with four M8x15 Bolts
(19
), four Ø20xØ8x2.0 Washers (14) that were removed. Tighten bolts with the S6 Allen Wrench
provided.
Slide the Handlebar Post Cover (58) down to the Handlebar Post (7).
Remove the M5x45 Bolt (40
) and Ø5 Big Washer (41) from the Tension Control Knob (54). Remove
bolt with the Multi Hex Tool with Phillips Screwdriver provided.
Put the cable end of resistance cable of Tension Control Knob (54) into the spring hook of Tension
Cable (55) as shown in drawing A of figure 3. Pull the resistance cable of Tension Control Knob (54)
up and force it into the gap of metal bracket of Tension Cable (55) as shown in drawing B of figure 3.
Attach the Tension Control Knob (54) onto the Handlebar Post (7) with the M5x45 Bolt (40
) and Ø5
Big Washer (41) that were removed. Tighten bolt with the Multi Hex Tool with Phillips Screwdriver
provided.