3
SAFETY INSTRUCTIONS
•
Read the manual before use and keep it for future reference.
•
Do not use during bath or in places with high humidity (swimming pools, saunas, etc.)
•
Do not immerse in water.
•
Do not use if the power cord or plug is damaged.
•
Never pull the power cord.
•
Never cover the lamp during operation or use the lamp if you are tired.
•
If the temperature is too high, burns may occur.
•
Do not look directly at the light.
•
Do not use in the genital area.
•
Do not use during sleep or if you are not properly dried.
•
Do not use continuously for more than 30 minutes.
•
Do not repair or modify the product.
•
Avoid bumps and falls on the lamp.
•
WARNING
: The product is not suitable for pregnant women, children, people suffering from
tumors, bleeding, blood clotting disorders, burns, damaged skin, or poor blood circulation.
•
WARNING
: The product is not suitable for people sensitive to light, heat, or sensitive skin.
USE
Plug the lamp into an outlet. Set the intensity to the lowest level.
Place the lamp in the required place and massage in a circular motion. If the temperature is too high,
increase the distance between the body and the bulb.
If irritation, reddening of the skin, burns occur or you notice that the skin is swollen, stop using the
product immediately and seek medical assistance.
If you use oils or creams, cover the area with a paper towel before use.
Use the lamp in one place for a maximum of 5 minutes.
After use, allow the lamp to cool and unplug it. Then clean the lamp with a damp cloth and let it dry
before using it again.
INTENSITY
The lamp has 4 intensity levels: 1 - 100%, 2 - 80%, 3 - 70%, 4 - 50%
When turned on, the lamp starts on the first level. Pressing the start button repeatedly reduces the
intensity to the lowest level and then turns it off.
TIMER
The timer has three levels: 1 - 10 min, 2 - 30 min, 3 - 40 min.
Turn on the lamp and use the timer button to set the time. The default value after start-up is 3. When
the timer is over, the lamp turns off. You can also turn off the lamp manually using the start button.
