9
1. Attach 2x double pulley holders (13) to the right and left adjustable cable holders (11 and 12)
with 2x 1/
2 ”X 4-1 / 4” hex screws (39), 4x 1/2 ”washers (51) and 2x nylon nuts 1/2 ”(56).
2. Attach the 2x guide rods (6) to the base (1). Depending on the weight configuration, attach the
weight according to Fig. 1 or 2. Slide the weight spacers (19 according to the configuration),
the rubber washers (23) and the weights (18) onto the guide rods (6).
3. Slide the top weight plate (16) onto the weight selection rod (17) and secure with top weight
plate bolt (43). Tighten. Screw the pulley holder (15) onto the weight selection rod (17) 10 full
turns. Then slide the top weight plate (16) and the weight selection rod (17) onto the guide
rods (6), see. picture.
4. Attach the guide bar holder (9) to the guide bars (6) and then attach the guide bar holder (9) to
the top frame (2) with
2x 5/16 ”X1 / 2” Allen bolts (45).
5. Fasten the guide rods (6) to the holder
(9) with 2x 5/16 ”X 1/4” hex bolts (50).
Tighten all screws.
Содержание BODYCRAFT IN 23288
Страница 1: ...USER MANUAL EN IN 23288 Adjustable double pulley Body Craft DPDL M...
Страница 14: ...14 DIAGRAM...