Insportline 6079, Руководство пользователя

Страница: 17 / 40

17
The purpose of weight setting is to let user know the calories expending and set the suitable formula
for changing. The weight can be set for every restart. After run end to return the weight setting page or
after SAFETY KEY being taken off.
•
Dormancy: When there is no any operation for a long time, computer will enter dormancy.
Systems will back to standby mode and close the screen light to save power. In dormancy
condition, press any key can light the screen.
QUICK START MODE
•
Start training:
a) In standby mode, press ENTER to confirm weight and press QUICK START to start the
training directly. Screen words showing zone will show "READY GO" and after 3 seconds
clockwise, the program start to working as speed of 0.8KPH(0.5MPH), the preset incline is
0˚,fitness time is account from"0:00", the max value is99:59.
b) During fitness:
1. Press INCLINE QUICK KEY or press INCLINE ↑ or INCLINE ↓ to adjust the Incline angle.
2. Press SPEED QUICK KEY or SPEED+ or SPEED- to adjust the current speed.
•
Stop or finish training:
a) During fitness, press stop will enter PAUSE mode. In this time, the speed will slowly back to 0
and incline stop at the current angle.
b) When the fitness time is to 99:59 seconds or in program and finish the goal value
(Time/Distance/Calories), in this time, the speed will slowly back to 0, incline stop at the
current angle, screen will show "RUN END". Press STOP for 4 seconds or time is over 4
minutes, systems will back to standby mode.
PROGRAM MODE
•
In standby mode, press ENTER to confirm weight, screen will show ”SELECT PROGRAM”.
•
Press Mode or SPEED+ / SPEED- for program changing, the turn is as below:
MANUAL → P1 → P2 → P3 → P4 → P5 → P6 → RANDOM → USER → H.R.C.1-3 → BODY FAT
•
Press STOP can back to the upper selection list.
PROGRAM_Manual
1. Press ENTER to confirm select Manual and enter time setting:
Press SPEED+ or SPEED- to adjust the goal time, preset value is 0:00 and range is 0,
20:00~99:00,the unit is minute: second.
2. Press ENTER to confirm time and enter Distance setting: