Insportline 6079, Руководство пользователя

Страница: 10 / 40

10
the above steps.
•
The position of running belt might not
stay precisely in the center with slightly
towards the left and right sides, and the
situation varies with how end-users use
and the weight of end-users. No need to
adjust the belt if it doesn’t rub against the
parts aside.
Depending on the usage of the product, please
apply SILICON on the board according to the
chart below. Use the Hex Wrench to unscrew the
bolt inside the Rear Roller. Then pull the belt up
and daub some SILICON to the center of the
board. After that, adjust the belt to the center of
the deck, followed by tightening the screw to the
original set.
When the belt is sliding, please follow the method
above to lubricate the running belt.
Speed and Maintenance Interval
Unit Operating Speed
Recommended Lubrication
Period
Metric Unit
6KM/hr below 1 year
6~12KM/hr 6 months
12KM/hr above 3 months
English Unit
4mile/hr below 1 year
4~8mile/hr 6 months
8mile/hr above 3 months
Remark: The maintenance interval is only intended for
household use. If used for commerce
，
it is suggested to
check the treadmill every month.
8. ADD SILICONE
•
Time of add SILICONE
When suggested time of adding SILICONE is achieved, please extend your hand to the center of the
running board to make sure whether there is any SILICONE before adding. If no SILICONE on the
running board, please add 30cc SILICONE to the running board. If there is still a little SILICONE, add
15cc SILICONE to the running board.
•
Area of adding SILICONE
Add SILICONE from the center of the running board to the running belt ’s the left and right side which
should minus 6 cm.