6
ASSEMBLY
STEP 1
Remove the pre-installed screws (J1), spring washers (J2) and washers (J3) f rom the rear stabilizer
(C).
Attach the rear stabilizer (C) to the main f rame (A) with screws (J1), spring washer (J2) and washer
(J3).
You need a 5 mm Allen key.
STEP 2
Remove the pre-installed bolts (J1), spring washers (J2) and washers (J3) f rom the f ront stabilizer (C).
Secure the f ront stabilizer (C) to the main f rame (A) with screws (J1), spring washer (J2) and washer
(J3).
You need a 5 mm Allen key.
NOTE
: Make sure that the exercise bike is stable if not adjust the stabilizing f eet if necessary.
