5
Press Turn on/off and Mode buttons together to enter settings. With Mode button you can cycle
through functions P0
– P9.
P0
– Wheel Diameter, Press the On / Off button to display the values, use Mode to increase the value
by 1, use the On / Off button to decrease the value by 1. After a few seconds of inactivity, the function
switches.
P1
– Undervoltage, Press the On / Off button to display the values, if the number 315 is displayed,
undervoltage is 31.5 volts. Use Mode to increase the value by 0.5, use the On / Off button to decrease
the value by 0.5. After a few seconds of inactivity, the function switches.
P2
– number of poles, Press the On / Off button to display the values, use Mode to increase the value
by 1, use the On / Off button to decrease the value by 1. After a few seconds of inactivity, the function
switches.
P3
– measuring the speed signal, press the on / off button to display the values, 0 means the motor
gives a speed signal (original value), 1 means the signal is external.
P4
– speed unit. Press the On / Off button to display values, 0 km / h, 1 mile / h.
P5
– start-up assistance, 0 start without reflection, 1 start with reflection. start off with reflection. PAS
is displayed.
P6
– cruise control, 0 off, 1 on.
P7
– start, 0 slow, 1 fast
P8
– speed limit
P9
– ABS
BRAKES
The scooter has both front and rear brakes. The rear warning light comes on when braking. High
speed or wet roads can affect the braking distance.