16
user manual
InspIred Instruments Inc.
17
adjUsting the synth layer:
to change the synth sound:
•
hold down the synth button.
•
use any selection method to navigate through the sounds. the
led blinks the number corresponding to the selected sound.
•
release the synth button to load the new sound. the musIc
button blinks to indicate that the preset has been changed.
to adjust the pan position of the synth layer:
•
hold the synth button
•
move the joystick left or right. the led display shows the synth
layer pan position.
to mute the synth, press the synth layer button to turn it off.
to save your modified preset, hold down the musIc button and then
press the record button.
note:
to save the new tuning to the current preset, hold musIc and
press record.
selecting backing tracks:
each preset has a backing track that you can jam along to. these
tracks are loops created specifically so that you can jam right out of
the box. the tracks use chord progressions common to rock and roll,
punk, country rock, pop rock, and the blues.
to play a backing track:
•
choose a preset with the up and doWn buttons, and wait a
couple of seconds for the preset to load.
•
press play. the track assigned to the preset starts looping.
•
play along with the backing track.
note:
to stop the backing track, press play again.
presets 1-10 are demo loops.
presets 11-20 are beginner loops.
presets 21-30 are advanced loops.
see appendix #1 for more details.
to change the track assigned to the selected preset:
•
hold the track button.
•
scroll through the available tracks using either navigation meth-
od. the led display shows you the track number.
•
release the track button. the musIc button blinks to indicate
that you have modified the preset.
•
press play to start and stop the track you selected.
note:
in addition to using the onboard backing tracks, internal sounds
can also be mixed with an external sound source, such as an mp3
player.
open tUnings:
each preset can store a tuning configuration along with its guitar and
synth sounds.
to select a tuning for the current preset:
•
press and hold the open button. the led display shows the cur-
rent preset’s tuning number for 3 seconds.
•
use buttons or fret select to choose the open tuning desired. val-
ues 1-55 correspond to open tunings. values 56-70 correspond
to “capo” tunings (see tuning summary in appendix #5).
•
release the open button.
adjUsting string tension:
the tension of the six strings on the right hand action of the yrG can
be adjusted by loosening or tightening the screws at the base of the
bridge, beneath the mute bar. (turn clockwise to increase tension.
turn counterclockwise to decrease tension).
these adjustments have some effect on sensitivity, but should only be
adjusted slightly to match your play style.
resetting presets and settings:
reload factory presets
press and hold GuItar and synth - press and release track.
reload global settings
While in the global option menu 5 press and hold record for 5 sec-
onds until the display blinks.
warning
: do not over tight-
en or over loosen. this could
cause the you rock Guitar to
malfunction.
