5
4
Pull out the hole plug, use a Pump (J) to inflate the Ball (C) until it is full, and
then insert the hole plug as below shown. Please make sure the max diameter
of the ball does not exceed 450mm after inflation.
C
A
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Hardware may loosen over time. Periodically check that all connections are tight.
6
Put Ball (C) onto Ball Base (A) as below shown.
Max 220LBS
plug
plug
air inflation
C
J
Warning: 1.The ball must be used with chair frame together, CAN NOT be
used separately.
2.Maximum total loading weight is not to exceed 220LBS on ball.
