Inspire Ignire Wired, Руководство пользователя

Страница: 10 / 12

BASIC FUNCTIONS (HEATING)
Off
Your heating will be switched off.
Auto
Your heating will follow your Temperature Profile
The default is: (This can be adjusted via your online account)
15 Degrees between 00:00 and 06:00
20 Degrees between 06:00 and 08.30
17 Degrees between 08:30 and 17:00
22 Degrees between 17:00 and 22:30
15 Degrees between 22:30 and 00:00
Man
Your heating will be switched on and keep your property at the set temperature.
Boost
This is used if you would like to switch your heating on for a set period of time.
The default is 1 hour at 20 degrees. When pressed, ‘BOOST CH’ will flash to indicate that boost is
currently active.
Your heating will switch on for the programmed length of time, at the programmed Boost
Temperature (If set.) After this time has expired, the Thermostat will return to the previous
state.
Adjusting the Temperature (not applicable when in Off)
Use the ‘/\’ and ‘\/’ buttons to set the desired room temperature.
Pressing the ‘CH MODE’ key will cycle through the above modes
.
Program Advance
This is used if you would like to ‘jump’ to the next profile temperature. Press the ‘ADV CH’ key to
‘jump’ to the next Temperature in your schedule. It will only have an effect if the Thermostat is
in auto mode. Pressing the ‘ADV CH’ key a 2nd time will cancel the program advance and the
unit will revert back to the current profile set temperature.
10