Put Bench Top (A) on smooth flat surface. Attach the four Leg (B) to the Bench Top (A)
use Nut (C), Lock Washer (D) and Flat Washer (E) on four holes of the Bench Top (A).
Turn the Wrench (F) in the Nut (C). Hand tighten only at this moment by using Wrench (F).
Take the Wrench, and turn the Nut
until the legs are secure.
DO NOT TIGHTEN COMPLETELY.
Stop when you feel you are adding
force to tighten the Nut.
Stand bench up on an even surface and check
that it is balanced. If there is a slight wobble, apply
downward pressure in the corner where a leg is
uneven. Keeping pressure in that corner, tighten all
nut. If balanced, apply downward pressure evenly
in the center and tighten all nut.
Do not over-tighten beyond hole depth.
A
B
E
D
C
F
2
Cleaning & Care:
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean
surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen
over time. Periodically check that all connections are tight.
B
A