C
F
D
E
Attach the four Table Leg (B) to the Table Top (A) use Bolt (C), Lock Washer (D) and Flat
Washer (E) on four holes of the Table Top (A). Turn the Allen Key (F) in the Bolt (C). Hand
tighten only at this moment by using Allen Key (F).
Stand table up on an even surface and check that it is
balanced. If there is a slight wobble, apply downward
pressure in the corner where a leg is uneven. Keeping
pressure in that corner, tighten all bolts. If balanced,
apply downward pressure evenly in the center and
tighten all bolts. Do not over-tighten beyond hole depth.
B
A
2
Cleaning & Care:
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean
surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen
over time. Periodically check that all connections are tight.
Take the Allen Key, and turn the bolts
until the legs are secure.
DO NOT TIGHTEN COMPLETELY.
Stop when you feel you are adding
force to tighten the bolt.
A
Phillips Head Screw Driver
Is Required But Not Included
Adjustable Shelf
Put Table Top (A) on smooth flat surface. Remove the four Adjustable Shelf with Phillips
Head Screw Driver (not Included).
A
B