9
Warning
Do not use out of range of -10
℃
to 50
℃
Do not place the videoscope in corruption environment.
Do not expose the vdieoscope into the rain and place the probe under
water long time
.
Do not place the videoscope in the magnetic environment.
Do not use the videoscope in mass dusty environment.
Keep the controller clean and do not scratch the monitor.
Do not disassemble the videoscope, the maintenance service goes
only to the person (s) the manufacturer authorizes.
Do not operate the videoscope when cable knotted to avoid damage
to internal steel wire.
When taking
picture and video, make sure LED is suitable for
inspection and not tremble the probe.
Check if batteries installed and charged before inspection.
After inspection, straighten articulation and then pull out, do not pull
out in a rush.
Clear the videoscope and the probe head and lense with wiper, put
into the case; do not squeeze, shock and impact the monitor, to avoid
damage. If not use the videoscope in a long period, take out the
batteries to avoid the corruption to the instrument.
Maintenance
Keep the videoscope clean and dry after on-site work.
Place the videocope into the designed case for the sake of extending
shelf-life of the product.
