5
6
Battery Installation
Put battery into the base:
Put battery case in to main unit:
Operation
1
2
Power on/off:
Long press power on/off key to turn on /off the instrument.
Start inspection:
Press
to turn on LED light.
Insert probe to the objects.
Control joystick key to make probe get to the target position.
Move j
Adjust LED illuminance and press zoom key to reach the best
image effects.
NOTICE: Make sure straightness of the probe before inserting
into objects to avoid damage to the probe.
LED brightness adjustment key
oystick damping key to right position, the probe will be
fixed.
Make sure battery and SD card are installed before using, then turn
on the device.
3
Take picture:
Press take picture key on the back to get a picture.
4
Take video:
Press switch key to enter take video mode, then press take video
key, press again to stop taking video.
take picture mode
take video mode
taking
taking
