11
12
①
The current measured value
②
The actual value (should be input)
③
The conversion relation
④
Internal ADC value(do not care)
⑤
The current calibrate point
Modulus
Modify: The
modulus
affects
the
measure
value,
when
modulus
is
bigger
,
the measure
value
will
be
smaller
.
Touch Up” to adjust the value,
“
DOWN
”
to
shift to the next position,
EXIT
to abort and
ENTER to confirm and back.
①
The
current
measured
value
②
Modulus
③
The
conversion
relation
④
Internal
ADC
value
(
do
not
care
)
“
touch
touch “
”
touch
“
”
Information: Information includes the logo, model, version of the
software and the serial number.
6
Charging
The Digital Force Gage is supplied with a set of 3 Nickel Metal
Hydride AAA rechargeable batteries, which are supplied fully
charged to allow use straight in the internal. Users need to recharge
batteries when a low battery icon appears in the display and flash.
Users should connect the gauge and the charger use the USB cable,
and then connect the charger with AC socket to start charging. Users
can also use other USB device (e.g. Laptop) to charge the gauge. A
fully charged battery pack will provide approximately 20 hours
constant use between charges. Rechargeable battery pack:
- Type: Ni-MH 3.6VDC 800mAH rechargeable batteries;
-Charging time: approx. 3~4 hours;
-Battery life: approx. charge and discharge 500 times.
