①
②
No. 7315-21
③
④
⑤
back
①
Button
②
Indicator
③
Plug
④
Serial number
for
example,
ID:4018070005
⑤
Product model
2
1
Introduction
Instructions for use
1
2
3
Button: Press the button to trigger data collection, and send one
data each time.
Indicator: For each successful data transmission, the red light
flashes once.
Plug: Inserted into the data interface of the gage
.
The applicable
gages for each type of transmitter are shown in the table below.
As shown in the f
igure, remove the four screws from the cover and load
the CR2032 battery with the positive side facing out.
4
Battery installation
:
7315-21(7315-22, 7315-30
…
):
transmitters
,
is connected to our
measuring tool and used with the receiver 7315-2 or 7315-3
to send the measuring value to the computer. A unique serial
number is printed on the side of each transmitter.
digital calipers and digital depth gauges
large digital calipers(range ≤1000mm)
and digital height gauges
digital
micrometers
7315-21
7315-22
7315-30
采集按键
Applicable gages
Code
Plug
7315-50
7315-50M
7315-60
Applicable gages
Code
Plug
high precision digital indicators
digital indicators, digital thickness gages and
digital internal/external caliper gages
No. 7315-21
Connection with gages
:
5
There is a velcro sticker being attached to the battery cover of
the transmitter, and another velcro sticker can be attached to the
appropriate position of the gage. Then, the transmitter can be
fixed on the gage with velcro stickers (as shown in the figure
below) to avoid inconvenience in the measurement process.
