InsiteIG MPA-48, Руководство пользователя

Страница: 16 / 51

16
TEST Mode
This mode of operation allows the user to perform basic test functions to aid in troubleshooting.
Operation of the TEST MODE proceeds as follows. From the Main Menu use the arrow keys to move
the cursor to the TEST option, then press the “ENTER” key. Use the arrow keys to select one of the
seven options, and then press the “ENTER” key.
VIEW SENSOR DATA
This option is intended primarily to aid the InsiteIG technical support engineers in troubleshooting.
The following sensor data is displayed: sensor type, sensor serial number, sensor reporting mode, and
sensor raw data. Press the “MENU” key to exit.
VIEW SENSOR CLK
This option will display the power line frequency which is used to filter the sensor data. Press the
“MENU” key to exit.
CAL ANALOG OUTPUT
This option will cause the analyzer to generate full scale output of 20mA on the selected analog
output. Use the “UP” and “DOWN” arrows keys to adjust the output, then press the “ENTER” key to
save.
TEST RELAYS
This option will test the setpoint and cleaning relays.
Setpoint relays:
This option will display the current status of the selected relay. To toggle the state of the relay,
press the "ENTER" key. The new status of the relay will be displayed. To exit, press the
"MENU" key.
Clean relays:
This option will display the current status of the clean relays. To toggle the state of the CLN1
relay, press the “UP” key. To toggle the state of the CLN2 relay, press the “DOWN” key. The
new status of the clean relays will be displayed. To exit, press the “MENU” key.
TEST MODBUS
This option will test the RS-485 communication port.
SOFTWARE VERSION
This option will display the current version of software in the analyzer. To exit, press the "MENU"
key.
VIEW SENSOR CHAR
This option is intended primarily to aid the InsiteIG technical support engineers in troubleshooting.
The characteristics for the selected sensor are displayed.