Note: Due to product improvement we reserve the right to change information and specifications without notice.
Contact Insinger Sales at 800-344-4802 for an installation drawing specific to your application.
This drawing is available on the Insinger webstie at www.insingermachine.com
Capacity Per Hour
30 racks
750 dishes
68 meals
Tank Capacity
6.08 gallons
Booster Capacity
3 gallon built-in booster
Motor Size
1hp (wash)
Electric Usage
2.2 kW wash tank
6.0 kW built-in booster (40°-70° rise)
6.85 kW maximum operating
Water Inlet Temperature
110°F recommended inlet water
temperature; 70 °F minimum
required water temperature
Final Rinse Consumption
at 20 psi min.
25.5 gallons/hour
0.80 gallons/rack
Exhaust Hood Requirement None
Time Cycle
120 sec. (Standard)
240 sec. (Extended)
130 sec. (Gentle)
Shipping Weight
165 lbs.
Current Draw Amps
208/1/60
208/3/60
Electric with Built-in Booster
33
20
SPECIFICATIONS
CONSTRUCTION
- Door, front, side, and top panels
are of stainless steel AISI304 (“T304”) construction
of various material thicknesses including sound-
suppression lined panels. Upper and lower wash/rinse
arms are T304 stainless steel and are interchangeable
and revolving. Tank is stainless steel with stamped
rounded corners for easy cleaning.
CONTROLS
- Electronic PCB waterproof membrane
controls with temperature display, LED indicator
lamps, and self-diagnostics for serviceability. Three
(3) dedicated cycle buttons (regular, extended, gentle)
also function to prime detergent and rinse aid.
WASH/RINSE SYSTEM
- Three (3) dedicated wash
cycles- Regular (dishware), Extended (cookware),
Gentle (glassware). 110°F recommended inlet
water temperature: 70°F minimum required water
temperature. Built-in atmospheric booster with
dedicated rinse pump for 180° final rinse.
DRAIN SYSTEM
- Drain pump moves water up to 29
½" above floor level. Connection to be open drain
with atmospheric air gap. Dishwasher drain system
cannot be tied into garbage disposal.
INTERNAL HEIGHT
- 13 3/16”
6245 State Road ∙ Philadelphia, PA 19135 ∙ PH: 800-344-4802 ∙ FX: 215-624-6966 ∙ w w w. i n s i n g e r m a c h i n e . c o m
Install Specifications Key
WI
- Water inlet pipe with 3/4”dia/19mm fittings
D
- Outlet pipe 11/16” ID /18 mm
(*).
EI
- Power supply
XD
- Detergent connection
EQ
- Equipotential (Ground) screw
XR
-
Rinse aid connection
(*)
- Only for model with drain pump
