Note: For all rough in connections see Installation and Layout Detail Drawing.
SPECIFICATIONS
CONSTRUCTION -
Entire unit constructed of type 304 polished stainless steel.
SINKS AND DRAINBOARDS -
Constructed of 14 gauge stainless steel. All interior corners are coved to 3/4” radius. Top is 14
gauge stainless steel all welded with 11” high backsplash and 3” high splash on front and sides with a 1
3
/
4
” rolled edge.
WASH SINK -
Consists of an intake and discharge manifold both side mounted with specially designed nozzles strategically placed
for maximum scrubbing action. Intake manifold includes hinged access panel to facilitate cleaning of the intake chamber, heater and
probes.
PUMP -
The pump is heavy duty cast iron construction with a 4” diameter intake and 3” diameter discharge. The motor is 2HP totally
enclosed, fan cooled with permanently sealed bearings.
SUPPORT -
The wash sink is supported by heavy gauge stainless steel channels welded to the underside of the sink. H frame leg
assemblies are removable and have stainless steel adjustable bullet feet.
CONTROL PANEL -
Control enclosure is made of S/S type 304 completely welded and waterproof (NEMA 4X). On/off power
switch, dual water temperature switch (low and high), on/off pump motor switch and reset switch. Heavy duty pump contactor and
overload. Heavy duty grounded plug. Controls labeled in English and Spanish.
PRE-ENGINEERED SYSTEMS -
The Dash 109, Marathon 140.
Current draw amps Heater
Pump & Controls
Total
Motor size
Heater size
2 hp
2.5 kw
Shipping weight
Dash 109
575 lbs.
Marathon 140 650 lbs.
240/60HZ/1PH ............. 10.4 ................ 11.9 ................... 22.3
480/60HZ/3PH .............. 3.0 ..................... 3.6 ........................ 6.6
QUADJET AQUA
●
SCRUBBER
DRAINBOARD
AVAILABLE
LENGTHS
15”
20”
24”
28”
36”
42”
48”
SANITIZER SINK
AVAILABLE
LENGTHS
15”
20”
24”
30”
36”
RINSE SINK
AVAILABLE LENGTHS
15”
18”
20”
24”
30”
36”
SCRAPPING STATION AVAILABLE LENGTHS
28” minimum
36”
OR
SOILED DRAINBOARD
28” minimum
36”
42”
48”
QUADJET AQUA
.
SCRUBBER WASHING STATION
AVAILABLE LENGTHS
36”
48”
54”
60”
28”
3M 10/06
PRINTED IN USA
Information and specifications subject to change without notice
