Note: For all rough in connections see Installation and Layout Detail Drawing.
SPECIFICATIONS
CONSTRUCTION -
The hopper, cabinet, feet, peel trap, screen, disc, discharge door and chute are all fabricated from type 304
#18-8 stainless steel. The drain and fill line are made of copper and the hopper cover is made of aluminum.
ABRASIVE DISC -
This special Insinger abrasive disc has a unique wave pattern in the stainless steel and a permanently
bonded silicone carbide abrasive for long life. The light-weight stainless disc with its stainless hub attachment to alloy shaft
prevents corrosion and allows easy removal for thorough cleaning.
DISCHARGE -
The stainless steel discharge door and hinge pin incorporates an easy lock-and-release lever. The stainless steel
chute is removable for easy cleaning.
DRIVE -
Standard frame motor (30VP-2: 3/4 HP. 50VP-2: 1 HP), with "V" belt drive provides direct speed reduction between
motor and peeling disc. The "V" belt motor drive design has a shock absorber effect to prevent damage in event of a jam or
overload. All bearings are sealed and permanently lubricated.
HOPPER -
Stainless steel hopper with silicone carbide abrasive permanently bonded to sides and discharge door. Insinger's
unique bonding technique provides quick positive peeling and long service from the abrasive.
FEET -
Adjustable stainless steel feet designed to be bolted to almost any type of floor surface.
SWITCH -
Toggle type or pushbutton station, located on the right side of the discharge chute as standard.
30VP-2 / 50VP-2
CSI
-
11400
Shipping weight
30VP-2
242 lbs.
50VP-2
262 lbs.
Current draw
amps
30VP-2
50VP-2
115/1/60 ............... 13.8 ................. 16.0
208/1/60 ................. 7.6 ................... 8.8
208/3/60 ................. 3.5 ................... 4.8
230/1/60 ................. 6.9 ................... 8.0
230/3/60 ................. 3.2 ................... 4.2
3M 09/06
PRINTED IN USA
Information and specifications subject to change without notice
