background image

42

www.insigniaproducts.com

USER MAINTENANCE INSTRUCTIONS

Troubleshooting

CAUTION: 

Do not try to repair your dryer yourself. Doing so invalidates the 

warranty.

PROBLEM

SOLUTION

Dryer does 
not start.

• Make sure that the dryer door is closed completely.
• If you opened the door during the drying cycle, press the 

 

(start/pause) button again.

• Make sure that the power cord is plugged into a working electrical 

outlet.

• Check the circuit breaker and fuses for your dryer’s electrical 

connection.

Dryer does 
not heat or 
does not dry.

• Your dryer may have moved into the cool-down process of the 

cycle. This is normal.

• Select a cycle other than 

Air Fluff

 and a temperature setting that is 

not “No Heat.”

• Do not overload your dryer. Depending on the size of your washer, 

one wash load should equal one dry load.

• Dry heavy items and lightweight items separately.
• If you are drying large, bulky items, like blankets or comforters, try 

repositioning the load to ensure even drying. This may need to be 
done a few times througout the cycle.

• The load may be too small to tumble correctly. Add a few towels or 

use the Manual Dry cycles.

• Clean the lint filter and exhaust duct.
• Check the circuit breaker and fuses for your dryer’s electrical 

connection.

• Make sure that the outside exhaust hood opens and closes freely.
• Check the exhaust system for lint buildup. Ducting should be 

inspected and cleaned annually.

• Make sure that your exhaust duct is a 4 in. (10.2 cm) rigid or 

semi-rigid metal duct.

Dryer is noisy.

• It is normal for your dryer to hum due to the high velocity of air 

moving through the dryer drum and exhaust system.

• It is normal to hear the dryer gas valve or heating element cycle on 

and off during the drying cycle.

• Check the load for objects, like coins, loose buttons, nails, or 

broken zippers. Remove these items.

• Make sure that your dryer is level.

Clothes are 
unevenly 
dried.

• Seams, pockets, and other similarly heavy areas may not be 

completely dry when the rest of the load has reached the selected 
dryness level. This is normal. Select the 

More Dry 

or 

Very Dry 

dryness level if desired.

• If you dry one heavy item with a lightweight load (such as one 

towel with sheets), the heavy item may not be completely dry 
when the rest of the load has reached the selected dryness level. 
For best drying results, dry heavy items and lightweight items 
separately.

Содержание NS-TDRE67W1
















































Отзывы: