www.insigniaproducts.com
33
4.8 Cu. Ft. Freestanding Gas Convection Range with Steam Cleaning
Setting the clock
The clock must be set to the correct time of day for the automatic oven timing functions to work correctly. You can adjust
the clock to show a 12-hour or 24-hour display. The 12-hour display is the default setting. The time of day can only be
changed when your range is not in use (standby).
1
Press the
Clock Set*
pad for three seconds.
2
Enter the current time in hours and minutes using the number pads. The time you set blinks on the display.
3
Touch the
AM/PM
pad to change between AM/PM.
4
Press the
Start
or
Clock Set*
pad to save. The display shows the time of the day.
Selecting the 12-hour or 24-hour display setting
1
Press and hold the
AM / PM
pad three seconds.The display shows the present mode.
2
Press the
AM / PM
pad to change between the 12-hour and 24-hour display setting. The display shows
12Hr
or
24Hr
depending on your selection.
3
Press the
Start
pad to save the clock display mode.
Using the timer
The timer serves as an extra timer that beeps when the set time has elapsed. It does not start or stop cooking functions.
You can use this function at the same time as any other oven function or even when neither the cooktop or oven are in
use. You can set the timer for any amount of time from 1 minute to 23 hours and 59 minutes.
1
Press the
Timer On/Off
pad. The display shows
Timer
, and
00:00
blinks in the display.
2
Use the number pads to enter the amount of time you want in minutes or hours and minutes. The display shows the
set time.
3
Press the
Start
pad to start the timer. The display shows the remaining time. When time has elapsed, the timer
continues to beep until you press the
Timer On/Off
pad. After you press the
Timer On/Off
pad, the display shows the
time of day.
Baking
The Bake function lets you program the oven to bake to any temperature between 150° F (66° C) and 550° F (288° C).
1
Position the oven rack where you want it.
2
Press
Bake
. The display shows the default temperature 350° and the bake icon blinks. If the default temperature is the
cooking temperature you want, skip to step 4.
3
(Optional) Press the number pads to enter the cooking temperature you want. The display blinks the temperature.
4
Press
Start
. The oven automatically lights and starts preheating. Preheating is important for good baking results.
The display shows
PRE
,
100°
, the time of the day, and bake icons until the oven reaches 100°. Then, the display shows
the actual oven temperature. When the oven reaches the temperature you set, it beeps three times.
5
Place the food in the oven, then close the oven door.
6
When baking is complete, remove the food from the oven, close the oven door, then press
Off/Clear
. The oven shuts
off and the display shows the time of day.
7
To change a programmed baking temperature, press
Bake
, enter the new baking temperature, then press
Start
. The
oven completes cooking at the new temperature.
Adjusting the thermostat
If your baking results are not what you are used to, the present oven cooking thermostat can be adjusted by up to ±35° F
(±19° C).
1
Press and hold
°F / °C
for three seconds while in standby mode. The display will show
0
.
2
Use the number pads to enter the temperature adjustment you want. For example, if you want the oven temperature
to be 10° higher than the displayed temperature, press
1
, then
0
. If you want the temperature to be 10 degrees lower,
press
1
,
0
, then press and hold
°F / °C
for one second. The display changes to -10.
3
Press
Start
. The display shows the time of day. The next time you bake, the oven uses the new temperature setting.
Note:
This temperature adjustment is retained in memory after a power failure. This adjustment will be used in all future baking,
including Bake, Fan Bake, Fan Roast, Broil, and Keep Warm. Adjusting the thermostat do not affect steam-cleaning. If you want to
adjust the temperature for a single baking task, see Baking on page 33.