www.insigniaproducts.com
13
NS-PMM6230
STEP 4: Attaching the monitors
Depending on the VESA screw holes on the back of your monitors, you need to use the M4 × 12 mm mounting screws (
A
)
or M5 × 12 mm mounting screws (
B
).
1
Determine which mounting screws you need (
A
or
B
) by hand-threading a screw in a VESA screw hole. Do not force the
screw to fit.
2
Center the back of a monitor on the monitor plate and align the mounting holes on the monitor with the holes on the
monitor plate.
3
Attach the monitor to the plate using four screws (
A
or
B
). Tighten the screws firmly but do not overtighten.
STEP 5: Adjusting the monitors
To avoid eye strain:
• Position your monitors about an arm’s length from your eyes.
• Position your monitors so there is no glare on the screens from windows or light sources.
• Tilt the screens up slightly.
• If you cannot read the on-screen text when your monitor is positioned correctly, you should increase the text size
instead of moving you or your monitors closer.
• Use the 4 × 4 Allen wrench (
I
) to adjust the viewing angle of the monitors.
• If a monitor does not stay in place, use the 4 × 4 Allen wrench to tighten the monitor tension.
• If a monitor arm does not stay in place, tighten the knob on the arm.
Note:
Each arm extends 11.9 inch (30.2 cm) horizontally and 15.7 inches (40 cm) vertically.
OR
To avoid injury, do not rotate the
monitors backward.