www.insigniaproducts.com
12
4
Slide the other monitor plate and support arm assembly (
1
or
4
) onto the support tube, making sure that the curved
portions of the arm are pointed up.
5
Make sure that the wider opening on one of the arm support rings (
5
) is facing up, then place the ring on the support
tube at the level you want the mounting plate and support arm. Use a Phillips screwdriver to tighten the pre-installed
screw in the ring to hold the ring in place.
6
Tighten the arm knob to secure the arm.
7
Install the tube cap (
6
) on top of the support tube using the M4 x 10 mm screw (
C
), then tighten the screw with the
3 × 3 mm Allen wrench (
D
).