Insignia NS-LCD40HD-09 Скачать руководство пользователя страница 4

Страница: 4 / 61

IMPORTANT SAFETY INSTRUCTIONS

Read all of the instructions before using this appliance. When using this appliance, always exercise

basic safety precautions, including the following:

Read instructions

Read all of the safety and operating instructions before you use your TV.

Retain instructions

Retain safety and operating instructions for future reference.

Follow warnings and instructions

Follow all warnings on your TV and in the operating instructions. Follow all operating and use

instructions.

Water and moisture

Do not use your TV near water. For example, do not use it near a bath tub, wash bowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool.

Cleaning

Unplug your TV before cleaning. Do not use liquid or aerosol cleaners. Use only a damp cloth to clean

the exterior of your TV.

Ventilation

Slots and openings in the cabinet and the back or bottom are provided for ventilation, reliable operation,

and protection from overheating.These openings must not be blocked or covered.Do not block the

openings by placing your TV on a bed, sofa, rug, or other similar surface. Do not place your TV near or

over a radiator or heat register. Do not place your TV in a built-in installation, such as a bookcase or

rack, unless you provide correct ventilation or follow the manufacturer’s instructions.

Heat

Make sure that your TV is located away from heat sources such as radiators, heat registers,stoves, or

other products (including amplifiers) that produce heat.

Grounding or polarization

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a grounding prong. The

wide blade or grounding prong are provided for your safety. If the plug does not fit, contact an

electrician to replace the

obsolete outlet.

Power cord protection

Route power cords so that they are not likely to be walked on or pinched by items placed on or against

them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit

from your TV.

Attachments

Use only attachments recommended by Insignia.

Stand

Do not place your TV on an unstable cart, stand, tripod,bracket, or table. Your TV may

fall,causing serious personal injury and serious damage to your TV. Use only with a cart,

stand, tripod, bracket, or table recommended by the manufacturer, or sold with your TV. If you mount

your TV to the wall,follow the manufacturer’s instructions and use a mounting accessory recommended

by the manufacturer. Your TV and cart combination should be moved with care. Quick stops,excessive

force, and uneven surfaces may cause your TV and cart combination to overturn.

Lightning

For added protection for your TV’s receiver during a lightning storm, or when it is left unattended and

Содержание NS-LCD40HD-09






























































Результаты поиска

Содержание NS-LCD40HD-09

Отзывы:

Похожие инструкции для NS-LCD40HD-09

Бренды по названию

Популярные бренды

Insignia NS-LCD40HD-09, Руководство по обслуживанию

Результаты поиска

Содержание NS-LCD40HD-09

Отзывы:

Похожие инструкции для NS-LCD40HD-09

Бренды по названию

Популярные бренды