Insignia NS-LCD26F, NS-LCD32F, NS-CL26C, Руководство пользователя

Страница: 8 / 34

6
Insignia NS-LCD26F/NS-LCD32F LCD TV
www.insignia-products.com
3 Press the INPUT button to set the TV’s signal
input to HDMI.
Connecting to a cable box
To connect your TV to a cable box with an RF
cable:
1 Turn off the TV and the cable box.
2 Connect a 75 ohm RF cable from the cable
box to the ANT. jack on the back of your TV.
3 Set the cable box output switch to channel 3
or 4, then tune your TV to the same channel.
4 Turn on the TV and the cable box.
5 Change channels at the cable box or with the
cable box remote.
To connect your TV to a cable box with a AV
cables:
1 Turn off the TV and the cable box.
2 Connect RCA video and audio cables from
the cable box to the VIDEO and AUDIO IN
jacks on the back of your TV.
• Yellow - Video
• White - Audio left
• Red - Audio right
3 Turn on the TV and the cable box.
4 Press the INPUT button to set the TV’s signal
input to AV1.
5 Change channels at the cable box or with the
cable box remote.
Connecting to a computer
To connect a computer video source to the
VGA jacks:
1 Connect a VGA cable from the computer to
the VGA jack on the TV.
2 Connect a male-to-male audio cable from the
computer to the VGA-AUDIO port on the TV.
3 Turn on the TV, then turn on the PC.
4 Press the INPUT button to set the TV’s signal
input to VGA.
Using your TV
Turning the power on and off
To turn the power on and off:
1 Press the POWER button on the front panel
of the TV or on the remote control. The
POWER indicator turns green.
2 To turn off the TV, press the POWER button
again. The screen image disappears and the
POWER indicator turns yellow (standby
status).
Changing the volume
You can change the volume using the TV’s front
panel or the remote control.
To change the volume:
1 Press VOL+ or VOL- .
2 Press MUTE on the remote control to mute
the sound, and press it again (or the VOL+ or
VOL- ) to restore the sound.
Changing the video source
Your TV supports multiple video sources.
To select the video source:
•
Press the INPUT button to select from the
following input modes:
•
TV
• AV1
• AV2
• S-VIDEO
• YPbPr
• VGA
• HDMI
The name of the input source appears on the
screen when it is selected.
Changing channels
To change channels:
•
Press CH+ or CH-.
-
Note
A small amount of electric power is consumed
even when the power is turned off.
Notes on HDMI
• HDMI™ - The HDMI logo and High-Definition
Multimedia Interface is a trademark or registered
trademark of HDMI Licensing.
• This TV can receive HDMI.
• This TV supports the HDCP (High-bandwidth
Digital Contents Protection) protocol for 720×480p,
1280×720p, and 1920×1080i resolution.
• When connected to a source device (DVD player,
set top box, or PC) supporting the Auto HDMI
function, the output resolution of the source device
will be set automatically to 1280×720p. If the
source device does not support Auto HDMI, you
must set the output resolution appropriately. For
best picture quality, adjust the DVD player, set top
box output resolution to 1280×720p, or the PC
graphics card output to 1280×768, 60 Hz.
• If the source device has HDMI output, no audio
connection is necessary.