Insignia NS-LCD26F, NS-LCD32F, NS-CL26C, Руководство пользователя

Страница: 6 / 34

4
Insignia NS-LCD26F/NS-LCD32F LCD TV
www.insignia-products.com
Remote control
Setting up your TV
Installing the remote control batteries
To install the batteries:
1 Open the battery compartment (1) on the
back of the remote control.
2 Insert the two AAA batteries (2)(provided)
into the battery compartment. Make sure that
the (+) and (-) symbols on the batteries
match the diagram inside the compartment.
3 Close the battery compartment (3).
Using the remote control
To use the remote control:
•
Point it directly at the TV, within a 30° angle
of the IR sensor on the front of the TV, and
within 20 feet.
Item Description
1 INPUT button. Press to select the AV signal input between
TV, AV1, AV2, YPbPr, VGA, and HDMI.
2 DISPLAY button. Press to show information about the
program playing.
3 MTS/SAP button. Press to select STEREO, SAP, or MONO
mode.
4 Number buttons: Press to directly enter channel numbers
5 RECALL button. While in TV mode, press to return to the
previous channel.
6 PICTURE button. Press to cycle through the picture modes
(USER, BRIGHT, STANDARD, and SOFT).
7 MENU button. Press to open the TV menu. Press again to
exit.
8 VOL-/+ buttons. Press to change the volume.
9 SCAN button. Press to scan through memorized TV
channels.
10 SLEEP button. Press to set the sleep timer.
11
POWER button. Press to turn the TV on and off.
12 ZOOM button. Press to zoom in on the picture (WIDE,
NORMAL, ZOOM, and CINEMA).
13 MUTE button. Press to mute the sound.
14 CCD button. Press to select Close Captions modes while in
TV, AV1, AV2, or S-VIDEO mode.
15 AUDIO button. Press to cycle through the audio modes
(STANDARD, NEWS, USER, and MUSIC).
16 CH +/- buttons. Press to skip to the next or previous
channel while in TV mode.
17 EXIT button. Press to turn off the on screen display.
Item Description
1 2
3