6
www.insigniaproducts.com
STEP 2 - Select screws, washers, and spacers
1
Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with
mounting hardware included. (If there are screws that came with the TV, they are almost always in the
holes on the back of the TV.) If you don't know the correct length of the mounting screws your TV
requires, test various sizes by hand threading the screws.
Select one of the following types of screws:
For a TV with a flat back:
M4 X 12mm screws (
02
)
M6 X 12mm screws (
03
)
M8 X 20mm screws (
04
)
For a TV with an irregular/obstructed back:
M4 X 35mm screws (
05
)
M6 X 35mm screws (
06
)
Select either an M4 washer (
07
) or an M6/M8 washer (
08
) for the corresponding types of screws.
For an irregular or obstructed TV back, also use the spacer (
09
)
CAUTION:
To avoid potential personal injuries and property damage, make sure that there are adequate
threads to secure the brackets to your TV. If you encounter resistance, stop immediately and contact customer
service. Use the shortest screw and spacer combination to accommodate your TV. Using hardware that is too long
may damage your TV. However, using a screw that is too short may cause your TV to fall from the mount.
2
Remove the screws from the holes in the back of your TV.
3
For a flat back TV, go to “STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back“ on
page 7.
-OR-
For an irregular or obstructed back, go to “STEP 3 - Option 2: Attaching the mounting hardware to TVs
with irregular or obstructed backs” on page 8.
Screw is too
long
Screw fits
correctly
Screw is too
short