27
Top Control Dishwasher
www.insigniaproducts.com
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
The dishwasher won’t
start
The door may not be closed
properly.
Make sure that the door is closed and latched.
The power is off or not
connected.
Make sure that the power is connected and turned on.
The delay start option is
selected.
Refer to the “Delay” section under “Controls and indicators” on
page 10.
The child lock is activated.
Deactivate the child lock. Refer to the “Child lock” section
under “Functions” on page 10.
The dishwasher beeps at
the end of the cycle
This is normal and indicates that
the wash cycle is complete.
The rinse aid light is on
The rinse aid level is low.
Add rinse aid.
The dishwasher runs too
long
The dishwasher is connected to a
cold water supply.
Make sure that the dishwasher is connected to a hot water
supply. If not, change the water supply to a hot water source.
The cycle time varies, depending
on the soil level of the dishes.
When heavy soil is detected, the wash times will be longer.
Depends on the option selected. Some options will add time to the cycle.
The dishes are not clean
enough
The water pressure is too low.
Make sure that the water pressure is above 20 psi. Use your
dishwasher when water demand is low.
The inlet water temperature is
too low.
Make sure that the dishwasher is connected to a hot water
supply. If not, change the water supply to a hot water source.
Use your dishwasher when hot water demand is low.
Dishes are too close together.
Reload the dishwasher as shown in “Preparing and loading
dishes” on page 12.
Improper use of detergent.
Add detergent depending on the water hardness and washing
cycle you choose. Use fresh detergent.
The selected cycle is not suitable
for the soil level on the dishes.
Choose a different cycle with a longer washing time.
The spray arms are blocked.
Make sure that the spray arms are not blocked and are free to
rotate.
The dishes are not drying
enough
The rinse aid dispenser is empty
or the setting is too low.
Fill the rinse aid dispenser.
Increase the rinse aid setting.
Dishes are loaded improperly.
Reload the dishwasher as shown in “Preparing and loading
dishes” on page 12.
The cycle you chose did not
include drying.
Choose a cycle with drying.
NS-DWH2_BS8_SS8_NS-DWR2_BS8_WH8_SS8_17-0336_MAN_V1_ENG.fm Page 27 Thursday, June 29, 2017 9:38 PM