11
Attaching your flash to the
stand
1
Rotate the lock ring on your flash’s mounting foot
counter-clockwise as far as it will go to make sure that the
lock ring is completely loosened.
2
Slide your flash’s mounting foot into the slot on the stand.
3
Rotate the lock ring on your flash’s mounting foot
clockwise until it locks in place.
4
Set the stand on a flat, stable surface.
OR
Screw the bottom of the stand into a standard camera
tripod.
Turning your flash on and off
Cautions:
• Turn off your flash if it will not be used for an extended
period of time.
• We recommend that you do not disable the
Auto Power
Off
function when your flash is used off camera.
1
Make sure that the batteries are installed. See Installing
batteries on page 8.
2
Press the (power) button for one second to turn on
your flash.
If you set up your flash as the master flash, your flash
turns off after about 90 seconds. To turn on (wake) your
flash, press the camera shutter halfway or press any
button.
If you set up your flash as a slave flash, your flash turns off
after about 60 minutes. To turn on (wake) your flash, press
any button.
3
Press the button again to turn off your flash.
