www.insigniaproducts.com
28
• Using the control panel, the setting is automatically saved after five seconds.
OR
• Point the remote control at your air conditioner unit and the setting is saved after one second.
Timer Off
Set the timer to automatically turn off your air conditioner after a set time.
1
Press the
TIMER
button on your air conditioner, or
TIMER OFF
on the remote control, until the Timer Off LED or
(on
the remote control) lights.
2
To set how long you want your air conditioner to run, press
/
(up/down) to adjust the delay time from 0.5–10
hours in half-hour increments, then 10–24 hours in one-hour increments. Your air conditioner stops running after the
timer counts down from the set time.
• Using the control panel, the setting is automatically saved after five seconds.
OR
• Point the remote control at your air conditioner unit and the setting is saved after one second.
Timer On to Off
Set Timer On to Off to automatically turn your air conditioner on, then back off, after a set time.
1
Press
TIMER
ON
until the Timer Off LED lights.
2
To set how long to wait before your air conditioner turns on, press
/
(up/down) to adjust the delay time from 0.5–
10 hours in half-hour increments, then 10–24 hours in one-hour increments.
3
Press
TIMER
ON
again. The number next to Timer Off blinks.
4
To set how long you want your air conditioner to run, press
/
(up/down) to adjust the delay time from 0.5–10
hours in half-hour increments, then 10–24 hours in one-hour increments. The setting is automatically saved after
pointing the remote control at your air conditioner for one second. Your air conditioner starts when the Timer On time
elapses, then turns off again after the Timer Off time elapses.
Timer Off to On
Set Timer Off to On to automatically turn your air conditioner off, then back on, after a set time.
1
Press
TIMER
OFF
until the number next to Timer Off blinks.
2
To set how long you want your air conditioner to run, press
/
(up/down) to adjust the delay time from 0.5–10
hours in half-hour increments, then 10–24 hours in one-hour increments.
3
Press
TIMER
OFF
again. The number next to Timer On blinks.
4
To set how long to wait before your air conditioner turns on, press
/
(up/down) to adjust the delay time from 0.5–
10 hours in half-hour increments, then 10–24 hours in one-hour increments. The setting is automatically saved after
pointing the remote control at your air conditioner for one second. Your air conditioner turns off when the Timer Off
time elapses, then turns on again after the Timer On time elapses.
Using the remote as a thermostat (I SENSE)
The remote control can function as a remote thermostat for precise temperature control at its location.
• To turn on the I SENSE feature, aim the remote control toward your air conditioner and press
I SENSE
. The remote
displays the temperature at its actual location and sends a signal to your air conditioner every three minutes.
Note
: I SENSE can only be turned on with the remote control.
• To turn off I SENSE, press
I SENSE
again.
Using the check filter reminder
• The check filter indicator lights (the LED above the
SWING
button on your air conditioner) automatically after 250
hours of operation. See Cleaning the air filter on page 30.
• To reset after cleaning the filter, press and hold the
SWING
button for three seconds. The light turns off.
Note
: To cancel the timer program, set the timer to
0:0
hours on the control panel. Your air conditioner turns off.
Note
: To cancel the timer program, set the timer to
0:0
hours on the control panel. Your air conditioner turns on.
Note
: To cancel the timer program, set the timer to 0.0 h.
Note
: To cancel the timer program, set the timer to 0.0 h.
Note
: Make sure that the remote control is turned toward the air conditioner when I SENSE is on, and there should be no obstacle
between the remote control and the air conditioner. If your air conditioner does not receive the I SENSE signal during any 7-minute
interval, your air conditioner beeps to indicate that I SENSE mode has ended.
