Switching On / Off
Operating Your Receiver
To turn on
POWER
switch on the panel, the unit is standby
mode, standby indicator light on the display is red, then,
press either button on the panel or
POWER
button on the
remote control. "
WELCOME
will be display on the display
and left direction moving. Stop three seconds when the
word pass the middle of display(flash three times),then left
direction moving and enter working mode.
STANDBY
:
when the receiver is on, press
POWER
button
on the remote once to activate the standby mode (only by
remote).
POWER OFF
: Press
POWER
switch on the panel to turn
off the unit .
DIGITAL HOME THEATER AMPLIFIER IS-HC040917
Note
:
In standby mode, this unit consumes a small amount of power in
order to receiver infrared-signals from the remote control.
Front Panel
Remote Control
TUNED
AUX
TAPE
TUNER
VIDEO
TV
VCR
DVD
6CH
MEMORY
To Adjust the Tone
You can adjust the tonal quanlity of your front left and right
speakers or headphones(when connected).
Turn the
TREBLE
knob on the panel to adjust high-frequency
of main speaker.The parameter is increased when clockwise
direction rotate the knob.The parameter is decreased when an-
ticlockwise direction rotate the knob.
Adjust High-frequency of Main Speakers
Turn the
BASS
knob on the front panel to adjust low-frequency
of main speaker.The parameter is increased when clockwise
direction rotate the knob.The parameter is decreased when an-
ticlockwise direction rotate the knob.
Adjust Low-frequency of Main Speakers
Front Panel
Front Panel
19
