www.insigniarange.com
Last Modified: 07/10/2014
20
Hand Shower
Shower Valve(s)
Connect the hoses to the corresponding inlets on the back of the shower. We suggest using tape thread to ensure a water tight seal.
Device output may differ from the image. Please refer to your outer chrome faceplate inside your Insignia shower as a reference point.
IF YOUR DIAL DOES NOT CORROSPOND TO THE APPROPRIATE DEVICE:
Turn on your water to the shower and note which output the water exits from then turn off the water and swap over the relevant hose.
Alternatively remove the outer chrome knob by removing the chrome cap and loosening the grub screw (please ensure not to unscrew fully as this will drop within the
chrome knob) this is found on the opposite side to the chrome pillar. Once you have succeeded in loosening this you can now slide your faceplate to correspond to
the device.
Monsoon Shower
Open Outlet For
Steam Generator
Left Column
Cold Water Inlet
Hot Water Inlet
Body Jets
Hand Shower
Foot Massager
Capped off
Right Column
Cold Water Inlet
Hot Water Inlet
Body Jets
The columns
market Left and
Right are
pictured looking
from the back of
the shower
