www.insigniarange.com
Last Modified: 20/08/2020
21
The steam generator has 3 connections.
1.
Steam Outlet:
Connect the insulated hose to the steam pod within your shower as shown in image
A.
Make sure these are fitted in the correct position as they are only attached for
transportation reasons only.
2.
Water Inlet:
Connect a braided hose (not supplied) from the shower valve
’
s centre feed to this opening.
2.
Drain
: Connect the grey rubber hose from the steam generators drain opening to the nozzle on the
shower waste as shown in image
B.
Secure in place with the use of the Jubilee clip (AMI01) found in
your screw pack Ensure you drill out the spigot to allow the steam generator water to drain in to the
waste.
Steam Generator Connections
(steam version only)
NOTE: MUST DRILL OUT
2
1
3
White Insulated Pipe
Steam Outlet
A
B
Steam
Generator
