INSIGHT 4K Dual LED Series, Инструкция по установке и быстрому запуску

Страница: 17 / 84

page 11
Digital Projection INSIGHT 4K Dual LED & Quad Series
Installation and Quick-Start Guide
PROJECTOR OVERVIEW
Rev B June 2016
Remote control - continued
6
FOCUS
Press to enter FOCUS ADJUSTMENT mode, then use the arrow keys to make the
adjustment.
7
CAL
Press and hold this key, then press
FOCUS
or
ZOOM
to calibrate focus or zoom
respectively.
8
ZOOM
Press to enter ZOOM ADJUSTMENT mode, then use the arrow keys to make the
adjustment.
9
SHIFT
Press to enter SHIFT ADJUSTMENT mode, then use the arrow keys to make the
adjustment.
10
Arrow keys
Use these keys to adjust lens focus, zoom and position.
11
EXIT
Exit lens adjustment modes.
VGA HDMI DVI 3GSDI
CVBS1 SVIDEO
CLOSE
1 2 3 4
COMP CVBS2
5 6 7 8
9 0 10+ #
MAIN SUB DUAL HD-T
OFF ON
ALT
ROLL
PITCH YAW
FOCUS
CAL
SHIFT ZOOM
EYE
SWAP
MAIN/PIP
SWAP
BRI CON GAMMA
3D
ON/OFF
PIP
ON/OFF
LOAD
SAVE
TEST ADDR
BACKLIGHT
R G B
PRESET
SHUTTER
OPEN
POWER
MENU
OK
EXIT
INFO
7
9
8
6
10
11
Notes
Not all remote control keys are used
on this projector. The unused keys
are grayed out.
You can use the remote control
wirelessly or connect it to the
projector using a standard TRS
cable. For further information,
see Control Connections in the
Connection Guide .
When a new lens is fitted, a
calibration procedure must be
carried out. For more information,
see
Calibrating zoom and focus
further in this guide.
When adjusting focus or zoom, UP
and LEFT will focus/zoom in, while
DOWN and RIGHT will zoom out.
When adjusting shift, each arrow
key moves the image in the
corresponding direction on the
screen.
When you enter FOCUS, ZOOM
or SHIFT ADJUSTMENT mode,
all other remote control functions
become unavailable. To cancel an
adjustment mode, either press
EXIT
or wait ten seconds.