Insight Vision Vutek, Руководство пользователя

Страница: 16 / 22

15
Sonde/Spring Assembly
The removable sonde is connected inside the spring assembly. It
continually transmits a signal at 512Hz, while the camera is turned on,
and can be located with any locator capable of picking up a 512Hz signal.
Skid Set
The skids are intended to protect the camera from damage due to debris in the pipe being inspected. The
standard skids come in two sizes. The 2” small skid is for use in 3-4” diameter pipes. The 3” large skid is for
use in 4-
6” diameter pipes.
Notice: Included with the system.
Skids Allen Wrench
The skid is one-piece device that affixes over the camera head. The skid is used to protect the integrity of the
camera head and normal usage wear and tear. It is held down by three set screws. Use the Allen wrench
provided by Insight Vision in the accessory bag to loosen the skids to slide out the camera head.
Car Power Adapter
The car power adapter is used to power up your camera system.
Notice: This is a 12 volt system. Included with the system
12 Volt Power Cord
The 12 DC volt power cord is used to power up your camera system.
Notice: This is a 12 volt system. Included with the system.
Video Inter-connect Cord
The video inter-connect cord will need to be connected from the reel to the
command module to display video. Notice: Included with the system.
https://www.youtube.com/watch?v=orwmYRtK78M