E-motion SmartPower Resistance System
5
Manual Modes:
PLAIN RESISTANCE (manual mode, single flashing green):
This mode features 9 preset resistance levels 0-8. Use the IR app to select.
The level may be adjusted anytime whether riding or not. The system will
alway
s seek the zero setting whenever it’s
powered up. The unit will stay in
the chosen resistance position when the power is unplugged and will not
move until it is powered up again. It can be ridden without being powered
up.
ERG RESISTANCE (manual mode, double flashing green):
To use the ERG, you must set a wattage target using the IR app.
Once the target is set, the system will automatically keep the resistance at
the target level as your speed changes. ERG works either with or without a
power meter. When a power meter is connected (solid blue light) it will
automatically correct wattage drift (power match). You can pause ERG by
getting off the bike. When you get back on and start riding, the system will
gently return to the target automatically.
Auto Mode Operation (app control)
To connect SmartPower to other cycling apps (ZWIFT, Trainer Road) power
it up and pair your power meter first, then launch the cycling app and
search for available trainers. The SmartPower will show up as "FEC trainer"
on most apps.
Once the connection is made, the cycling app will take control of the Smart
Power system. A power meter, if connected, will become the default power
source for the trainer. You may also disconnect the power meter from the
rollers and connect it directly to the cycling app if desired. It is not
recommended to have the power meter connected to both at the same
time.
