E-motion SmartPower Resistance System
2
DETAILED INFORMATION
The Smart Power system uses a magnetic device to change resistance levels. The
magnet is precisely positioned to create the desired wattage for the rider.
The two modes of operation are Manual and Auto control.
-In Auto, the system is paired to and controlled by the app of your choice. A
computer or mobile device is required. If you are using a PC to run your
preferred cycling app, you will need an ANT key plugged in to the USB port.
-In Manual mode, the system is operated with the Inside Ride companion app or
the optional handlebar remote. In Manual mode, you can choose between plain
resistance, ERG or SIM.
MANUAL MODE OVERVIEW
Choose between Plain resistance, ERG or SIM.
PLAIN RESISTANCE allows you to choose one of 9 preset magnet settings using the
remote.
ERG resistance allows you to set a wattage target in 10 watt increments with the
app or remote and let the system modulate the magnet position to maintain the
target. If you pair a power meter, it will be used as the wattage reference in ERG.
SIM allows a grade to be specified and automatically applies wind resistance.
AUTO MODE OVERVIEW
In this mode, a cycling app installed on your computer or mobile device
communicates with the Smart Power system. The Smart Power system will
recognize apps that use either ANT+FEC or Bluetooth FTMS.
A power meter (ANT+) can be paired to the SmartPower in either Auto or Manual
mode.
