E-motion SmartPower Resistance System
1
Quick start guide (Refer to additional sections for more details)
NOTE:
Because of the floating action of the rollers, it is important to route the
power cord to avoid strain as the frame moves. Route the cord up through
the clip on the control box, then out over the red frame, to the right-hand
side of the rollers. Be sure there is no cord contact with the flywheel or
drums.
-Plug in control box (solid red light).
-Launch the IR companion app and register. Set your weight in rider profile.
-Go to general settings page.
-Pair the SmartPower rollers to the app.
-Pair your power meter if available (Solid blue light) The power meter must
be awake to pair.
-If using the fork stand, select it in the app.
-Push the ride icon to access the ride dashboard.
-Choose a ride mode on the IR app
…
OR
-Close the Inside Ride app and launch your favorite cycling app (Zwift,etc)
and connect to the SmartPower as “FEC trainer serial #xxxx”
.
In future sessions, you do not need to open the IR app to connect to your
favorite cycling apps. Your power meter will also connect automatically to
the rollers.
