Inside Out Networks Edgeport/2, Руководство по установке

Страница: 17 / 28

For Windows NT Users
Because Microsoft does not support USB in NT4.0, Inside Out Networks supplies a USB
stack that will be installed along with the necessary drivers. NOTE: You must install the
drivers using an account that has administrative privileges!
To install the USB stack and Edgeport drivers:
1a) Insert the “Edgeport Driver” CD into your CD-ROM drive.
2a) When the welcome dialog appears, click the “ Install Driver ” button.
- OR -
1b) From the Start menu, select Run .
2b) Type <CD drive letter>:\NT40\ip4n4XXX.exe , and click “ OK ”. Note: “XXX” repre-
sents a version number. Example: Driver version 1.31 would be ip4n4131.exe.
Once the driver installation program has begun, follow the on screen instructions.
3a) If you are installing drivers for the first time : An Information dialog informs you that
the installation was successful. After clicking “ OK ”, the installation is complete.
3b) If you are replacing version 1.14 or later: Follow the on-screen instructions. Note
that before beginning the installation of the drivers, all applications with open ports
must be closed and all USB devices unplugged. If you close all the applications and
unplug all the USB devices, then you will not need to reboot for the new drivers to take
effect immediately. If any applications are left open or USB devices plugged in, you
may choose to abort the installation or to continue and be required to reboot before the
upgrade can take effect.
3c) If you are replacing version 1.13 or earlier: The Edgeport Drivers Installation Com-
plete dialog tells you that the Edgeport drivers have been updated. Before the updates
can take effect, however, you will need to reboot your computer. To reboot immedi-
ately, eject the “Edgeport Driver” disk, select the option to restart the computer now,
and click “Finish”.
Follow the instructions described in “Plugging Edgeport Into Your PC” on page 13. When
finished with the instructions, your new communication ports, numbered sequentially fol-
lowing the existing ports in your system, are ready!
Note that because Windows NT 4.0 is not Plug-and-Play, you will not see a pop-up dialog
box indicating that new hardware has been found. You may verify correct installation with
the Edgeport Utility or USB Status Utility (USB Viewer). See Appendix for more informa-
tion.
For Windows 2000 Users
1) Insert the “Edgeport Driver” CD into your CD-ROM drive.
2) Follow the instructions described in “Plugging Edgeport Into Your PC” on page 13.
3) After connecting the USB cable, the Found New Hardware Wizard appears. Click
“
Next ”.
4) Select “ Search for a suitable driver for my device ” and click “ Next ”.
5) Select “ Specify a location ” and click “ Next ”.
6) Type <CD drive letter>:\Win2k and click “ OK ”.
15