Inside Out Networks Edgeport/2, Руководство по установке

Страница: 12 / 28

For Windows 98, CE, SE, ME, and 2000 Users
After following the instructions described in “Plugging Edgeport Into Your PC” on page 9,
hub installation will be complete and you may continue with “Installing Edgeport Drivers”
on this page.
For Windows NT Users
No separate process for installing hubs on NT4 is required. Go to “Installing Edgeport
Drivers” on this page.
Installing Edgeport Drivers
Installing the Edgeport/421 and Edgeport/21 is a three part process involving drivers for
the USB hub, Edgeport, and printer port.
The installation instructions are for installing the Edgeport software from CD. If you are
installing from diskette and using Windows 95, 98, SE, ME, or 2000, when prompted for
the location of the drivers, specify your 3-1/2” floppy drive (usually
a: ). NT users will not
be prompted and will need to locate the driver by double-clicking on their floppy drive. In
either case, you will not need to specify a directory.
For Windows 95 Users
Follow the instructions described in "Plugging Edgeport Into Your PC" on page 9. After
connecting the USB cable, if the Update Device Driver Wizard dialog does not appear,
please review "Using USB with Windows 95" in the Appendix. Otherwise, click "
Next " to
continue with driver installation.
To install the Edgeport drivers:
1) Insert the "Edgeport Driver" CD into your CD-ROM drive.
2) After Windows fails to locate the drivers on your floppy disk drive, click " Other Loca-
tions... ".
3) When the Select Other Location dialog appears, type <CD drive letter>:\Win95 and
click " OK ".
4) Confirm that Windows is pointing to <CD drive letter>:\Win95 and click " Finish ".
5) When Windows prompts you for the driver disk, click " OK ".
6) At the next Windows prompt, type <CD drive letter>:\Win95 and click " OK ".
After installing the drivers, Windows will detect your Edgeport's new COM ports and will
begin to initialize them. Installation is complete when no more dialogs appear. Your new
communication ports, numbered sequentially following the existing ports in your system,
are now ready!
For Windows 98, CE, SE, and ME Users
1) Insert the "Edgeport Driver" CD into your CD-ROM drive.
2) Follow the instructions described in "Plugging Edgeport Into Your PC" on this page.
3) After connecting the USB cable, the Add New Hardware Wizard appears. Click
"
Next ".
10