inshape 17408, Инструкция по эксплуатации

Страница: 39 / 68

39
NO
SE
FI
GB
DE
DK
ET
When the crosstrainer is in use, it should
be monitored continuously. When the
crosstrainer is in use, any children near
it must not be left unattended. The
crosstrainer is not a toy.
Remember to check your crosstrainer
regularly. Tighten all screws, bolts and nuts
on the crosstrainer as required. Inspect the
crosstrainer and replace any worn parts. Do
not use the crosstrainer if it is defective.
When moving the crosstrainer, employ the
correct lifting technique.
The crosstrainer is only intended for indoor
use in private households.
Special safety instructions
WARNING! The pulse monitor may be
inaccurate. Training too hard may involve a
risk of personal injury or death. If you feel
unwell, stop exercising immediately.
Preparations for assembly
Two people are required to assemble the
crosstrainer.
Lay all the pieces out on the fl oor and check
that all the parts are there.
Please refer to the illustration and parts list
at the back of the manual.
You must use the following tools:
• Allen key
• Adjustable wrench or spanner
• Phillips screwdriver
Assembly and preparation
Screw the front stabiliser (2) and the rear
stabiliser (3) securely to the frame (1) using
the curved washers (16), spring washers (18)
and bolts (17).
Push the handlebar post cover (58) over the
handlebar post (4).