INSE E3 PLUS, Руководство пользователя

Страница: 14 / 19

12
Product maintenance
1. Side brush cleaning
If the side brush becomes dirty, please clean it with water and dry it before using; if
the side brush is damaged and cannot work normally, please replace it.
2. Trash box and filter cleaning
A. Press the finger mark on rotating cover to automatically pop up the cover.
B. After taking out the trash box, please check whether there is any foreign matter in
the air suction channel of the host and clean it.
C. Take out the high-efficiency filter.
D. Take out the primary filter.
E. Lower the height of trash box to pour out the dust.
F. Fully clean the trash box, primary filter, and advanced filter. The high-efficiency
filter is recommended to be cleaned after 15-30 days of use. The maximum
service life of the high-efficiency filter is 24 months. The high-efficiency filter
cannot be cleaned with a brush. It can be blown clean with a blower, or lightly
knocked with the help of external force to make the dust fall off. Do not wash it
with water.
G. Install and use correctly. Please make sure that the two filters have been installed
before use to avoid damage to the device.
! Notice:
A. Please clean the trash box and the suction channel after each cleaning.
B. After washing the parts, dry them and do not expose them to the sun, and put
them into the machine after being fully dried, so as not to affect the function and
life of the machine.
C. The primary filter and high-efficiency filter must be replaced in time to avoid
affecting the dust removal effect.
! Notice:
When replacing the side brush, please correspond to the "L" and "R" marks on the
side brush, as well as the "L" and "R" on the side brush position at the bottom of the
machine.